Can't get moved sections feature to work properly

Post your bug reports here.
Post Reply
mcote
Posts: 1
Joined: Fri Apr 01, 2011 4:21 pm

Can't get moved sections feature to work properly

Post by mcote »

Using CompareIt 4.1 -

My moved sections feature was working great, then something happened. I was messing with the settings, and now, no matter what I try, I cannot get the feature to work properly.

Help!

My current config is Options->Options->Comparison->Advanced->Find moved sections is checked. use line compare is the only other thing checked, with 3 min chars and 20% min line matching.


Thanks in advance for any help!!

brahman
Posts: 180
Joined: Thu Jan 11, 2007 6:18 pm

Re: Can't get moved sections feature to work properly

Post by brahman »

Maybe you could rename the wincmp3.ini file, then start again from fresh. But you must have your serial handy, since it is also stored in the ini (or add it back with a compare operation :)).

grigsoft
Site Admin
Posts: 1673
Joined: Tue Sep 23, 2003 7:37 pm
Contact:

Re: Can't get moved sections feature to work properly

Post by grigsoft »

Well, maybe your settings are OK, but CompareIt fails to find moved blocks? it will only work if full changed block was moved, and it may not find it if moved block is located next to changed block.

Post Reply