Happy New Year

Do you have anything to share with other users? Your opinions about our programs, suggestions for future products - everything goes here.
Spitfire_ch
Posts: 84
Joined: Mon May 21, 2007 9:11 am
Location: Basel, Switzerland

Happy New Year

Postby Spitfire_ch » Tue Jan 04, 2011 9:16 pm

Happy New Year! I hope, 2011 won't be the year where you stop developing our favorite tools?

Please don't give up on them!

Cheers
- spitfire

grigsoft
Site Admin
Posts: 1671
Joined: Tue Sep 23, 2003 7:37 pm

Re: Happy New Year

Postby grigsoft » Thu Jan 13, 2011 10:29 am

Thank you! Sorry for delay, I was on holidays.
I'm not planning to stop developing my simple tools, in fact I hope in 2011 I will be able to do it more and better, unlike 2010 :)

brahman
Posts: 180
Joined: Thu Jan 11, 2007 6:18 pm

Re: Happy New Year

Postby brahman » Mon Jan 17, 2011 3:09 pm

grigsoft wrote:I will be able to do it more and better, unlike 2010 :)


Hooray! :D

Spitfire_ch
Posts: 84
Joined: Mon May 21, 2007 9:11 am
Location: Basel, Switzerland

Re: Happy New Year

Postby Spitfire_ch » Wed Jan 19, 2011 8:36 am

Hooray indeed, I was a little worried :)

I just asked the IT-department of our company to order 3 licenses of CompareIt!, my colleges in the office were totally convinced by the trial :)

grigsoft
Site Admin
Posts: 1671
Joined: Tue Sep 23, 2003 7:37 pm

Re: Happy New Year

Postby grigsoft » Wed Jan 19, 2011 9:19 am

Thank you! :)

Spitfire_ch
Posts: 84
Joined: Mon May 21, 2007 9:11 am
Location: Basel, Switzerland

Re: Happy New Year

Postby Spitfire_ch » Fri Jan 28, 2011 10:02 am

Ok, I got three shiny licenses for CompareIt!. Now the "problem":

So far, I've been using my private license on my machine at work (sorry for that). Now, I would like to switch to the new license. But, how do I do that? The "Select Register!" menu item is no longer available, once you have registered.

Thanks for your help and best regards
- spitfire

grigsoft
Site Admin
Posts: 1671
Joined: Tue Sep 23, 2003 7:37 pm

Re: Happy New Year

Postby grigsoft » Fri Jan 28, 2011 1:09 pm

Well, I do allow Personal license to be used on up to 3 computers, but anyway thank you very much for support! :)
There is no specific "Change license" button. If you really want to do it, you can either delete license info from ini, or from registry, depending on where your settings are stored. Check for wincmp3.lic file too.

Spitfire_ch
Posts: 84
Joined: Mon May 21, 2007 9:11 am
Location: Basel, Switzerland

Re: Happy New Year

Postby Spitfire_ch » Fri Jan 28, 2011 3:11 pm

Ah, 3 computers? That's very generous! I really didn't realize that - well, good for you, maybe that way the project will live for a little while longer :)

Your trick worked perfectly, thank you very much!

Spitfire_ch
Posts: 84
Joined: Mon May 21, 2007 9:11 am
Location: Basel, Switzerland

Re: Happy New Year

Postby Spitfire_ch » Fri Jun 10, 2011 8:05 pm

Hm, hello? Proof of life? Now even the board seems to be dead :(

TonHu
Posts: 100
Joined: Mon Sep 29, 2003 10:48 am
Location: Netherlands

Re: Happy New Year

Postby TonHu » Tue Jun 14, 2011 11:25 am

Spitfire_ch wrote:Now even the board seems to be dead :(

Look at it from the bright side: The software is so great, it needs very little support :D :mrgreen:

grigsoft
Site Admin
Posts: 1671
Joined: Tue Sep 23, 2003 7:37 pm

Re: Happy New Year

Postby grigsoft » Tue Jun 14, 2011 11:38 am

Nobody is dead I hope :) But - I have not much free time to improve software -> no updates -> popularity drops. Alas.

Spitfire_ch
Posts: 84
Joined: Mon May 21, 2007 9:11 am
Location: Basel, Switzerland

Re: Happy New Year

Postby Spitfire_ch » Sat Jun 18, 2011 3:52 pm

Too bad, but I know what you mean. Coding takes a hell lot of time, which one usually doesn't have.

I just hope that if something serious should occur (e.g. Microsoft update breaking your software), you would not just drop it. You have created great tools and I hope we will be able to use them for a couple of years to come.

Thanks for all the great work you have invested!

Regards
- spitfire


Return to “General discussion”

Who is online

Users browsing this forum: No registered users and 1 guest